T 3507 404

7 8 4 5 6 3 14 T 3653 404 U T 3653 424 U 1 T 3653 434 U F F 12 (12-a) A 8 (08-a) 7 (07-b) M18x0,75 E 20 7 (07-a) not all types 5,5 6 (6-a) 12,3 T 3638 404 U T 3638 424 U T 3638 434 U T 3507 404 U T 3507 424 U T 3507 434 U T 3487 404 U T 3487 424 U T 3487 434 U T 3478 404 U T 3478 424 U T 3478 434 U T 3403 404 U T 3403 424 U T 3403 434 U E D D Contact arrangement Contact arrangement Rated voltage3) Rated voltage Rated impulse withstand voltage3) Pollution degree3) Installation category Insulation group C Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. Current rating Insulation resistance Contact resistance Climatic category Temperatur range IP degree Insertion and withdrawal force Mechanical operation Housing material Dielectric material Contacts Termination technique Flamability B locking system Standard DIN EN 61076-2-106 2) IEC 60130-9 IEC 60664-1 UL 1977 IEC 60664-1 60664-1 60664-1 IEC 60664-1 IEC 60512-5-2 UL 1977 IEC 60512-3-1 IEC 60512-2-1 IEC 60668-1 IEC 60668-1 IEC 60529 IEC 4 5 5 6 7 03-a 04-a 05-a 05-b 06-a 07-a yes no yes no 300 V 300 V 100 V 300 V (100 V) (63 V) (32 V) (63 V) 250 V 1500 V 1200 V 1500 V (1500 V) (800 V) (1500V) 1 (2) 2+3 1) IEC IEC IEC 60512-13-2 7 8 07-b 08-a yes 100 V (32 V) 14-a 12-a II, 10A/+40°C 150 V 5 (32 V) 60 V (05-a) T 3359 434 U T 3363 404 U T 3363 424 U T 3363 434 U T 3303 404 U T 3303 424 U T 3303 434 U 1200 V 4 (04-a) C 3A/+40°C 7A/+40°C 10 T 3359 424 U (800 V) 400 < CTI < 600 >10 T 3359 404 U no 3 4) (03-a) 1000 mating cycles metal screw coupling; tightening torque 0,7 - 1,5 Nm (Pin 1+3) 50N brass and / or zinc die cast, nickel plated thermoplastic gold plated solder UL 94 VO 60130-9 (05-b) I 60512-9-1 IEC 5 14 12 DIN EN 61076-2-106 2 contact version: contact loading 1+3 2) Edition 2000-05 3) values in brackets are according to DIN EN 61076-2-106 4) under operating conditions >108 Ohm A Do not connect or disconnect under load. Metal housing parts shall be securely incoporated to protected ground. Remark for gold plated contacts: In order to avoid brittle inter-metallic connections, gold plated terminals have to be tin-plated in the solder area. All technical data have been measured in a laboratory environment and can be different during pratical usage of the product. Any product information is for descriptive usage only and not legally binding; particulary the information does not constitute or provide any legal guaranties ("Beschaffenheitsgarantie" or " Haltbarkeitsgarantie"). Contact Number of contacts arrangement (Contact arrangement acc. View on DIN EN 61076-2-106) mating side Gewicht (errechnet) / Calc WT : 12,983 g Prüfmaß / Testdimension Teileindex / Partindexnumber: Zul. Abw./Tolerances : ISO 2768-c Bagatelle change: Maßstab / Scale : 2:1: 1:1 A3 CUSTOMER DRAWING DIN / ISO 13715 FAI2021-002708 Number of contacts 1) 8 7 6 5 Gez. 13.01.2016 Drawn MCARLE Status Released Gepr. 16.06.2021 Checked MBERTSCH 20210006 Index Änderung/Description 01 15.06.2021 MCARL Datum/Date Name Female receptacle rear mounting, dip solder Amphenol Tuchel Industrial GmbH M Blatt/Sheet GA T 3XXX 4X4 U Ers. f. / Replacement for : 1 1 Bl. NXM-V01 Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of the utility model or design. (14-a) 2